Le produit de Pass4Test peut assurer les candidats à réussir le test IBM 000-541 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.
Vous avez aussi la possibilité à réussir le test IBM 000-541. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test IBM 000-541 sans aucune doute si vous choisissez le Pass4Test.
Code d'Examen: 000-541
Nom d'Examen: IBM (DB2 9.7 DBA for Linux UNIX and Windows)
Questions et réponses: 104 Q&As
Dans n'importe quelle industrie, tout le monde espère une meilleure occasion de se promouvoir, surtout dans l'industrie de IT. Les professionnelles dans l'industrie IT ont envie d'une plus grande space de se développer. Le Certificat IBM 000-541 peut réaliser ce rêve. Et Pass4Test peut vous aider à réussir le test IBM 000-541.
Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test IBM 000-541 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test IBM 000-541 réel est lancée. C'est possible à réussir 100% avec le produit de IBM 000-541. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.
000-541 Démo gratuit à télécharger: http://www.pass4test.fr/000-541.html
NO.1 Click the Exhibit button
Given the INSERT statements shown below:
INSERT INTO applicant VALUES (1 , ¯ ¡¯ 5 4
INSERT INTO applicant VALUES (2, 'F ¯, 38 )
INSERT INTO applicant VALUES (3, ® ¡¯, 2 1
INSERT INTO applicant VALUES (4, 'F ¯, 91 )
INSERT INTO applicant VALUES (5, 'C ¯, 50 )
INSERT INTO applicant VALUES (6, 'C ¯, 70 )
INSERT INTO applicant VALUES (7, 'C ¯, 95 )
How many rows will be successfully inserted?
A. 1
B. 3
C. 5
D. 7
Answer: C
IBM examen 000-541 000-541 examen
NO.2 Which two plug-in types does the DB2 database system provide? (Choose two.)
A. Group retrieval
B. Kerberos authentication
C. Server authentication
D. Encryption authentication
Answer: A C
certification IBM certification 000-541 certification 000-541 000-541 examen 000-541 examen
NO.3 BOB and ALICE moved from the DEVELOPER group to the ANALYST group.
As the security administrator, which two commands would remove Bob and Alice
from the DEVELOPER group? (Choose two.)
A. REVOKE ROLE developer FROM bob, alice
B. REVOKE GROUP developer FROM bob, alice
C. REVOKE ROLE developer FROM USER bob, USER alice
D. REVOKE GROUP developer FROM USER bob, USER alice
Answer: A C
certification IBM certification 000-541 000-541 000-541 000-541 examen
NO.4 A DBA wants to use Label Based Access Control (LBAC) to protect Individual
rows in a table.
Which data type must be used to create a column to hold the necessary LBAC
security data?
A. SYSPR0C.DB2LBACU\BEL
B. SYSPR0C.DB2SECURITYU\BEL
C. SYSIBM .DB2LBACLABEL
D. SYSIBM .DB2SECURITYLABEL
Answer: D
certification IBM certification 000-541 certification 000-541
NO.5 Which HADR feature minimizes the impact of software maintenance on the
Standby server?
A. Configure all AUTOMATIC features.
B. Configure all AUTOMATIC maintenance parameters.
C. Configure AUTOMATIC maintenance and perform a rolling upgrade
D. Configure AUTOMATIC maintenance and perform a roll forward.
Answer: C
IBM 000-541 examen certification 000-541 000-541 certification 000-541
NO.6 What are three authorization categories in DB2? (Choose three.)
A System-level
B Database-level
C Network-level
D Object-level
E Instance-level
Answer: ABD
certification IBM 000-541 certification 000-541
NO.7 Because of an application abend, a database named PAYROLL needs to be
restored to approximately 9:26 am on June 1, 2009. After the database is
restored from a backup image, the command shown below is executed:
ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002
USING LOCAL TIME AND STOP
When this command is executed, the error shown below is generated:
SQL4970N Roll-forward recovery on database "PAYROLL" cannot reach the
specified stop point (end-of-log or point-in-time) because of missing log
file(s) on node(s) "0".
Which two commands could be used to resolve this error? (Choose two.)
A. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP
B. ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002 USING UTC TIME
AND STOP
C. ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002 USING LOCAL
TIME AND STOP OVERFLOW LOG PATH /mnt/arclog
D. ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002 USING UTC TIME
AND STOP NORETRIEVE MISSING RECORDS
Answer: A C
IBM examen 000-541 000-541 000-541 examen 000-541 examen
NO.8 If a non-recoverable database crashes, how can a DBA successfully restart
the database if a table space is damaged and cannot complete crash recovery?
A. The database must be restarted using the RESTART DATABASE command with
the DROP PENDING TABLESPACES option specified. At that point, the database
can be brought on-line and the damaged table space must be dropped and
re-created.
B. The damaged table space must be restored from the latest backup and any
active transaction logs in the log path can then be applied to it using the
TABLESPACE ONLINE option of the ROLLFORWARD DATABASE command. This will bring
the table space on-line and synchronize it with the rest of the database.
C. The damaged table space must be restored from the latest backup image.
Once restored from the backup image, the RESTART DATABASE command can be issued
to apply all the relevant transactions from the active logs. At that point,
the database will come on-line and all table spaces will be synchronized.
D. The damaged table space will require that the entire database be restored
from the latest backup image because the database is non-recoverable and will
not be accessible.
Answer: A
IBM examen 000-541 examen 000-541 000-541 examen 000-541
NO.9 Given the DDL shown below:
CREATE TABLE tab1 (coll SMALLINT );
CREATE VIEW v1 AS SELECT coll FROMtabl WHERE coll > 25 ;
CREATE VIEW V2 AS SELECT COI1 FROM v1 WITH CASCADED CHECK OPTION
CREATE VIEW v3 AS SELECT coll FROM v2 WHERE coll < 100 ;
Which statement will fail?
A. INSERT INTO v2 VALUES (35)
B. INSERT INTO v1 VALUES (5)
C. INSERT INTO v3 VALUES (25)
D. INSERT INTO v3 VALUES (200)
Answer: C
IBM examen 000-541 000-541
NO.10 A database administrator takes a full backup of the PRODUCTS database
every Sunday. During the week, two other backups are taken, one on Tuesday
and one on Thursday. The PRODUCTS database is about 800 GB in size, and about
20 percent of the data is modified throughout a week.
Assuming that backup times need to be kept to a minimum, which command should
be used to produce the Tuesday and Thursday backup images?
A. BACKUP DATABASE products TO /mnt/backup
B. BACKUP DATABASE products INCREMENTAL TO /mnt/backup
C. BACKUP DATABASE products TO /mnt/backup UTIL_IMPACT_PRIORITY 10
D. BACKUP DATABASE products INCREMENTAL DELTA TO /mnt/backup
Answer: D
IBM 000-541 examen certification 000-541 000-541 examen 000-541
NO.11 Due to an application error, some data was deleted from a very large table
residing in table space TS1. The table space was then renamed TS2 before the
error was detected. Rather than try and rebuild this table, it was decided
that database DB1 would be restored and then rolled forward to a point-in-time
(PIT) before the delete operation took place. Unfortunately the PiT roll
forward was done to a time that was too early and some critical transactions
were missing when the database was brought back on-line.
Which steps must be taken to ensure that the critical transactions which are
currently missing from the database are correctly applied to the database
and that table space TS1 is renamed TS2?
A 1. Restore database DB1.
2. Roll forward to the correct point-in-time.
3. Rename TS1 to TS2.
B 1. Restore table space TS1 from the DB1 backup image.
2. Roll forward to the correct point-in-time.
3. Rename table space TS1 to TS2.
4. Re-run the batch processes.
C 1, Restore database DB1
2. Roll forward to end of logs.
D 1. Restore table space TS1 from the DB1 backup image.
2. Roll forward to end of logs.
Answer: A
IBM 000-541 000-541 000-541
NO.12 Which statement is correct about informational constraints?
A. An informational constraint can be used by the SQL compiler to improve
the access to data and query performance.
B. The database manager uses an informational constraint to enforce the
uniqueness of the key during changes to the columns of the unique constraint.
C. An informational constraint is a column or combination of columns that
has the same properties as a unique constraint.
D. An informational constraint specifies that every row that is inserted or
updated in the table must conform to the definition of the table.
Answer: A
IBM examen certification 000-541 000-541 000-541 000-541 000-541
NO.13 Click the Exhibit button.
Refer to the logging configuration parameters shown in the exhibit.
What will happen if there are currently 100 active log files and DB2 needs
to create log file 101?
A. At least one application will receive a "log full" error and at least one
transaction will be rolled back because the active log space is full.
B. Log file 101 will go into the OVERFLOWLOGPATH directory since the active
log space is full and infinite logging has been enabled.
C. The database will appear to be hung since the active log space is full
and the BLK_LOG_DSK_FUL parameter is set to YES.
D. Log file 101 will be successfully created in the primary log path since
infinite logging has been enabled. Applications will continue processing
normally.
Answer: D
IBM 000-541 000-541 examen 000-541 000-541
NO.14 What are three system and database level authorizations available with
DB2? (Choose three.)
A SYSMON
B SYSMNT
C DBCTRL
D SYS ADM
E DBADM
Answer: A D E
IBM 000-541 000-541 certification 000-541 000-541
NO.15 Click the Exhibit button.
In the exhibit, where would the authentication of the supplied userid and
password from a remote client take place?
A. AIX operating system
B. LDAP Server
C. Kerberos Server
D. "MyPlugin.so" GSS-API plug-in
Answer: B
certification IBM certification 000-541 certification 000-541 000-541 000-541 000-541
NO.16 Which administrative authority is needed to run the audit stored procedures
and table functions such as the AUDIT_DELIM_EXTRACT stored procedure?
A DBADM
B SECADM
C SQLADM
D SYS ADM
Answer: B
IBM certification 000-541 000-541
NO.17 .A database named PAYROLL was backed up on Sunday. On Tuesday, a table space
in the PAYROLL database was renamed from TBSP1 to EMPINFO_TBSP. On Thursday,
the database was restored from the backup image created on Sunday.
Which command must be issued to roll the renamed table space forward to the
current date and time?
A. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP TABLESPACE(tbspl)
B. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP
TABLESPACE(empinfo_tbsp)
C. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP TABLESPACE(tbsp 1
TO empinfo_tbsp)
D. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP TABLESPACE(tbsp 1
RENAME empinfo_tbsp)
Answer: B
IBM examen 000-541 000-541 certification 000-541
NO.18 Which two can be replicated using HADR? (Choose two.)
A. database configuration changes
B. CREATE TABLE ... NOT LOGGED INITIALLY operations
C. Data Definition Language (DDL) statements
D. LOAD operations
Answer: C D
IBM examen certification 000-541 000-541 examen
NO.19 How does the DB2 Server identify the list of GSS-API plug-ins it supports?
A. by using the SRVCON_GSSPLUGIN_LIST database manager configuration
parameter
B. by using the SRVCON_GSSPLUGIN_LIST registry variable
C. by using the SRVSUPP_GSSPLUGIN_LIST database manager configuration
parameter
D. by using the SRVSUPP_GSSPLUGIN_LIST registry variable
Answer: A
certification IBM 000-541 000-541 000-541 examen 000-541 000-541
NO.20 Which set of procedures will be required to perform a rolling upgrade
in a HADR environment?
A 1. Upgrade the system where the primary database resides.
2. Issue the TAKEOVER HADR command on the primary database server.
3. Upgrade the original primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
B 1. Upgrade the system where the standby database resides.
2. Issue the TAKEOVER HADR command on the primary database server.
3. Upgrade the original primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
C 1. Upgrade the system where the primary database resides.
2. Issue the TAKEOVER HADR command on the primary database server.
3. Upgrade the new primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
D 1. Upgrade the system where the standby database resides.
2. Issue the TAKEOVER HADR command on the standby database server.
3. Upgrade the original primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
Answer: D
IBM 000-541 examen 000-541 certification 000-541
Pass4Test est un site à offrir les Q&As de tout les tests Certification IT. Chez Pass4Test, vous pouvez trouvez de meilleurs matériaux. Nos guides d'étude vous permettent de réussir le test Certification IBM 000-541 sans aucune doute, sinon nous allons rendre votre argent d'acheter la Q&A et la mettre à jour tout de suite, en fait, c'est une situation très rare. Bien que il existe plusieurs façons à améliorer votre concurrence de carrière, Pass4Test est lequel plus efficace : Moins d'argent et moins de temps dépensés, plus sûr à passer le test Certification. De plus, un an de service après vendre est gratuit pour vous.
没有评论:
发表评论